top of page

Hye, I'm

--------- Mohammad Shahid ---------

  • LinkedIn - White Circle
  • Twitter - White Circle
  • Facebook - White Circle
  • Google+ - White Circle
Picture1.png

Legal Metrology Engineer I Quality Inspector I Quality Officer ESMA Metrology Project at the Northern Emirates : (Sharjah, Ajman, UAQ, RAK, Fujairah).

  • LinkedIn - White Circle
  • Twitter - White Circle

hey i'm 

------- Mohammad Shahid-------

Professional Profile

Explore your business with a new strategy to bring back the stability of the organization. Change your plan for the upcoming month and survive in the middle of the COVID -19 pandemic. It’s time to take precise decision for the stability of the organization, where the world trying to find sustainable solutions.

Over nine years of experience within the field of Engineering, Legal Metrology, Conformity assessment as a Verification & validation engineer, Inspection engineer, and Quality controller position.

Expert Legal Metrology Verification and Quality Inspection with exceptional technical skills to ensure fairness measurement trade between consumer and traders.

Performing Legal Metrology activities as a Verification Engineer in the Northern Emirates (Sharjah, Ajman, Umm Al Quwain, Ras al Khaimah, and Fujairah) with Emirates Authority of Standardization and Metrology (ESMA) Project to ensure public guarantee from the point of view of security and accuracy of the weighments and measurements

Conducting Periodic and Surveillance Verification as required and fallowed by legal Metrology Regulation with International organization of Legal Metrology (OIML) standard to ensure Quality infrastructure of the country and protect both the buyer and the seller in a commercial transaction, or where measurements are used.

Ensure all Verification conducted properly without conflict of interest and take action of non-compliance activities to minimise risk of transaction and maintain legal metrology control, as well.

Activities are at Northern emirates ( Continuing as plan ):

 

  • Verification of Non-Automated Electronic Balances (Class I & II, III & IV)

  • Verification and Validation of Medical Equipments (Digital Thermometers, Infrared Thermometers, Blood       

  • Pressure Gauges (Non-invasive automated sphygmomanometers)

  • Verification and Validation of Fuel Meters In-Service Stations (Fuel Nozzles), Fixed on Distribution Tanks

  • Verification and Validation of Taxi Meters

Areas of Expertise

  • ISO Standard

  • Verification and Validation                           

  • Legal Metrology

  • Product inspection

  • Third-party inspect of Lifting Equipment

  • Conformity assessment

  • Quality controller

  • Quality Assurance

  • Calibration

  • Quality Management system

  • Troubleshooting               

 

​

tru.JPG
Anchor 1

​

Technical Skills

​

  • ISO Standard: ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17024, ISO/IEC 17056, ISO 9001

  • Compliance: Quality Infrastructure, governmental policy, Regulation, International Standard, National Standard, Circular, Mandatory Requirements, Specific procedures

  • Quality management system: Manual, Procedures, Forms, Formats, Checklist, Complaint, Control, Audit

  • Customer Engagement: Relationship, Communication, Understand, Importance, Needs, Technique, Solution

  • Inspection: Compliance, Specification, Quality, Safety, Fitness, Defects, Design, Installation, Determination

  • Verification and Validation: Compliance, Specification, Performance, Accuracy, Tolerance, physical layout, static analysis, Evidence, Limitation, Claim

  • Defect and Tolerance: Flaw, Damage, Accuracy, Comparison, Numerical, tolerate

  • Quality Control Analysis: Reading Comprehension, Critical Thinking, Active Listening, Monitoring, Complex Problem Solving

  • Report writing: Write a complete, concise and clear report with evidence

  • Corrective action: Nonconformity, Root cause, Correction, Documentation, Evaluate effectiveness. Control, Monitoring

  • Preventive action: Analyse, Evaluate potential effects of failure, Indemnification solution, Implantation solution, Documentation, Evaluate the effectiveness

  • Documentation: Document Control, Documents types, Identification and Labeling, Design & Set-up, Soft and hard copy, Controlled Document, Absolute Document, Approved Document, Authorized document.

  • Auditing: Process Audit, Product Audit, System Audit, First Party Audit, Second Party Audit, Third Party Audit, Auditor, Audit Team, Audit Plan, Audit execution, Audit reporting, Audit follow-up and closure, Corrective action, Preventive action

ERP111.PNG

​​

Computer and Software

​​

  • Microsoft office 365: Purchase, Admin Control, Installation, Step-up, Basic Settings, Home screen

  • OneDrive: Desktop App, Sharing Files with Others, Retrieving Files from OneDrive, Saving to the Cloud, Welcome to OneDrive

  • Outlook: Account setup, Tasks, Planner, Calendar, Email, Contacts, Email Templates, and Signature.

  • Word: Common Buttons, Tabs and Ribbons, Headers and Footers,  Document Location Links, Web Links, Email Links, Indexes, Table of Contents, Restriction, Bookmarks, Charts, Applying Themes, Quick Parts – Options, Format, Page Layout, Text Effects, Restrict Editing, Comment, Watermark, Developer Text only

  • Excel: Workbook, Spreadsheets, Formulas, functions and formatting, Charts & Graphs, Intermediate Functions and cell referencing, Filter Data, PivotTable, Conditional Formatting, Data validation, Name Manager, Micro.

  • PowerPoint: Managing PowerPoint Files, Working with Pictures, Multimedia ( Photos,  voice, Videos ), Tables Charts and Diagrams, Animation, Slide Masters, Create Theme, Change file type( image, Video, Slide show, pdf).

  • Teams: Setting App, Creating Team, Public and Private, Link team, Themes, Adding member, Guest Permission, Manage profile, Team Picture, Slide Masters, File storage and management, Communicating,  Setting.

  • Microsoft Edge: Updated Version, Microsoft Edge, Set default search engine, Microsoft Edge Stop advertisement, Ad favorites.

  • Google: Google Chrome, Contacts, Email, Maps, Calendar,  Share Drive,  Manage bookmarks, Setting, Manage Password, YouTube Channel, Classroom.

  • Adobe Acrobat: Create Pdf, Convert Pdf, Edit Pdf, Share Pdf, Sign Pdf, Stamp pdf, Meagre pdf, Split pdf

  • Design: Company profile, Templates, Leaf

  • Video: Editing, Trimming, Adding Text, Fade, Background music

  • Marketing: LinkedIn, Facebook, Google ads, Quora, SEO, Others

​​

Management Skills​

​

  • Team management: Unique Approach, Appreciate, Support, Respect, Managing, Recognise influence, inspire, accountable, manageable, Understand, importance, Mastermind, Open mind, Impartial, confidence.

  • Communication: Influence, Communication Styles, Identifying, First Impressions, Appearance, Being Positive, Right Words, Body Language, Voice, Listening

  • Coaching and Training: Interpersonal Communication Skills, Self Disclosure, Critical Coaching Skills, Communication, Voice Pitch, Coaching Style, Language preference, Feedback, Topic.

  • Operation and coordination: Day to day Operation, Agenda, Scheduling, Coordinate Customers Supplier, Transport.

  • Monitoring and Evaluation (M&E): Progress, performance, Continuous assessment outputs, outcomes, examination, effectiveness, efficiency, impact

  • Judgment and Decision Making: Right decisions, Confidence, Impartiality, Conflict of Interest, Bias, Belief, Ethic

  • Complex Problem Solving: Initiative, Creativity, Resourcefulness, Analytical Thinking, Determination, Results-Oriented, Collaboration

  • Critical Thinking: Analysis, Communication, Creativity, Open-Mindedness, Problem Solving, Clarification

  • Team Work: Team Member, Communication, Delegation, Efficiency, Ideas, Support collaborate, Common achievement,

  • Time Management: Clear vision, Priorities, Focus, Urgency, Tasks, Calendar, Reminder Systems

​​

Other Skills​

​

  • Coordinate-measuring machine (CMM):  Fundamentals of using, Concept, Preventive Maintenance Fundamentals

 

  • ARM: Portable ARM, Fundamentals of using, mathematical concepts of Metrology, coordinate systems and vectors, alignments, measuring techniques

 

  • VISION: Fundamentals of using, mathematical concepts of Metrology, coordinate systems, vision machine works, detailing the optics, and give a brief introduction to alignments

 

  • Laser Tracker: Fundamentals of using, basics of measuring with a laser tracker with an introduction to reflectors and hardware components, statistical concepts such as accuracy and precision

I have completed online training with a certificate , for Basic Fundamental and Concept, 

iauditor_edited.jpg

Coming together is a beginning; keeping together is progress; working together is success.

Henry Ford

23444.png
experience

WORK EXPERIENCE

Legal Metrology Engineer (Emirates Authority of Standardization and Metrology (ESMA) Project                 Feb 2019 – Present

Sowt Al Jouda Professional Safety & Health - Dubai, U.A.E                                                                                          

 

Preparing, Maintaining, and implementing Inspection Method/ Verification Procedures to test activities are adequate to verify system operability and functional capability

Preparing Project Plan, Inspection test plans (PTIs), Quality Assurance Plan (QAP) , Job Procedures (JPs) , Training plan , Risk Priority

Maintain technical compliance with national regulatory authority and International standard (ESMA /EIAC / ENAS / GSO / OIML /ILAC - IAF)

Monitoring and controlling projects with respect to cost, resource deployment, time over-runs and quality compliance to ensure satisfactory execution of projects

Ensuring all Precises instrument, Reference Standards and Devices are calibrated, maintain and handle carefully

Ensuring Training , Qualification and Authorization of the inspector to perform verification / Inspection with respect to product and instrument

Ensuring Acceptance and Rejection criteria with respect to product and instrument

Performing Visual Inspection (VT), Performance Test (PT), Load Test, Volume Test, Pressure Test, Linearity, Repeatability, Eccentricity Test, Liquid Flow Test.

Ensuring calibration, Ensuring Product Type approval , Declaration of Conformity Assessment, Marking, Manufacturer details, Capacity, Accuracy class, Condition, Crack , Damage , Defect, Display Brightness, Levelling and Preloading, Zero error test, Different level of Performance Test, Measurement Accuracy , Maximum permissible error , which fulfil minimum requirement of the technical standard and directives

Ensure product or item meet their minimum metrology regulation requirement and its under metrology control

Write complete, concise and clear report with evidences and suggestions.

Ensure all NCRs closed and corrective and preventive (CAPA) actions are correctly implemented.

Prepare Report and Presentation monthly , Quarterly and yearly

Be a part of Internal and External Quality Management Audit ISO/ IEC 17020 and 17025

​

Quality Controller / Operation Incharge                                                                                   June 2016 - Nov 2017

Valpas Safety and Valpas Inspection Services - Dubai, U.A.E  

 

Preparation, maintenance and amendments of Quality System documents according to the ISO17020 to ensure that the Quality management system and its processes in compliance with international standards.

Coordinate and conducting Internal and External auditing or from Govt. institution (EIAC and ENAS or any. Evaluating and resolving non-conformance and initiate necessary corrections and corrective actions to check their recurrence.

Conduct Management review meetings, discuss the quality objective status; outcomes from the audits, customer feedbacks analysis, and day to day other internal and external issues.

Monitoring of in and out customer assets carefully, maintaining technical records. Review and monitoring of all the Inspection certificates as per international standards.

Maintain Approvals & Accreditation Local and international Authority (DM - KHDA- EIAC - ENAS - HABC- DCAS - Trakhees - EGA – DCCA – IOSH – BSC - NEBOSH-etc

Monitoring and participating to develop training programs as per requirement

Ensuring all training materials, trainer’s competency, training delivery, assessment and documents are meeting the requirements of standard

Coordinate with Trainer and Inspector for new training and inspection challenges and Problems

Establish and maintain relationships with external (outsourced) training suppliers

Builds and maintains strong working relationships with Customers, Vendors, and Co-Workers

Lead, Manage and motivate the people within the organization

Quality Controller/Inspection Engineer                                                                            May 2013 - June 2016

Dutech Safety and Security Consultants -Dubai, U.A.E  

 

Preparing , Reviewing quality manual, quality system procedures, and Forms/Formats as per ISO/IEC 17020:2012 Conformity Assessment standard

Preparation, Coordination, Arrangement, for assessment with EIAC/ DAC)

Initiate follow-up audit activities in order to verify and record the implementation and effectiveness of corrective and preventive action taken.

Take over the responsibilities of Technical Manager in his absence.

Documentation and record management (Invoices , Quotation, QMS etc )

Assist engineers for Inspection on site (On demand)

Builds and maintains strong working relationships with Customers

Technician                                                                                                                              Oct 2009 - Aug 2012

​

Airhind Aviation Academy - India

 

Minor repair and replacement of below aircrafts

  • CESSNA 172 R GARMIN G1000 fitted with Lyc IO-360-L2A engine

  • CESSNA 152 fitted with Lyc-o-235-L2C engine

​

​

​

Trainee Technician                                                                                                             Jan 2009 - June 2009

​

Deccan Charters ltd - Delhi, India

 

Minor repair and replacement of below aircrafts

  • Pilatus PC-12, 12/45, 12/47 fitted with P&W PT6A-67B Engine

  • Bell 206B3 Helicopter fitted with Allison 250C20J Engine

  • Bell 230 Helicopter fitted with Allison 250C30G/2 Engine

  • EC-115 Helicopter fitted with Ariel 1 E2 Engine

  • Bell 407 fitted with Allison 250C47B Engine

EDUCATION

Professional Qualification

1.jpg

01 

Aircraft Maintenance Engineering​ | 2009 

​

Director General of Civil Aviation, Government of- India

Training and Certificates

ISO

Awareness and Internal Audit Course to ISO/IEC 17020:2012                                      

Emirates International Accreditation Centre (EIAC) – Dubai

 

Awareness ISO/IEC 17025:2017 Online Training Course on the changes to the standard         

Asia Pacific Accreditation Cooperation Incorporated (APAC)

​

Awareness Training ISO/IEC 17065: 2012 Online Training Course Conformity assessment                Asia Pacific Accreditation Cooperation Incorporated (APAC)

COVID-19

A

Infection Prevention and Control (IPC) for Novel Coronavirus (COVID-19)      2020

World Health Organization (WHO)

B

Let's Break the Chain of COVID-19 Infection                                                  2020

Mohammed bin Rashid University of Medicine and Health Sciences - Dubai

Metrology

Introduction to Measurement and Metrology                                                             

National Physical Laboratory (NPL) - UK

 

Introduction to Measurement Uncertainty                                                                  

National Physical Laboratory (NPL) – UK

 

Portable 3D Metrology                                                                                                           

National Physical Laboratory (NPL) – UK

 

Introduction to Metrology as an Element of Quality Infrastructure                   

International Organization of Legal Metrology (OIML) – Belgium

 

Legal Metrology in Detail                                                                                                              

International Organization of Legal Metrology (OIML) – Belgium

​

CMM Fundamentals Course                                                                                                           Hexagon Manufacturing Intelligence – UK

 

CMM Preventive Maintenance Fundamentals Course                                             

 Hexagon Manufacturing Intelligence – UK

 

Arm Fundamentals Course                                                                                                   

 Hexagon Manufacturing Intelligence – UK

 

Vision Fundamentals Course                                                                                                       

 Hexagon Manufacturing Intelligence – UK

​

Laser Tracker Fundamentals Course                                                                               

Hexagon Manufacturing Intelligence - UK

 

Work from Home and Stress

Remote Workers' Health, Safety and Welfare                                                                           British Safety Council - U.K

 

Managing Stress within Your Team                                                                                            

British Safety Council - U.K

 

​

 

                                                                                                           

 

Other 

Introduction to the 5S Concept Course                                                                            

Uttana Online, Bellingham, USA


Six Sigma White Belt

Aveta Business Institute - USA

 

Legislation and Risk Assessment – Healthcare Course                                           

Health and Safety Authority – Ireland

 

The Safety Data Sheet Awareness Certification™                                                       

The International Association for Chemical Safety – UK

 

Introduction to the COSHH Risk Assessor Certification™                                        

The International Association for Chemical Safety – UK

​

Managing Risk for OSH Professionals                                                                               

International Institute of Risk and Safety Management (iirsm) – UK

 

Elementary First-Aid                                                                                                                        Fire Prevention & Fire-Fighting                                                                                          

Scaffolding Inspector                                                                                                               

 

National and International Organization , Regulatory Authority

         Relation  all those Organisations as needed 

 

  • Awareness - (Some of this Awareness only)  

  • Buying standard 

  • Implementation

  • Maintain the product, process, and service to comply

  • Applying for Accreditation and Approvals

  • Centar coordinator or Contact Person 

  • Fee and Charges 

  • Prepare document as required 

  • Document review

  • Closing NCR or Suggestions 

  • Ready for assessment and Audit   

  • Closing NCR

  • Ready for reassessment and Audit

  • Closing NCR 

  • Result 

  • Continuous Monitoring and reporting 

  • Implement  Update version of standard or guideline  

 

​

 

                                                                                                           

 

HOBBIES and INTEREST 

Tropical Island Resort
SOCIALIZING
SPORTS
SWIMMING

events & Schedule

Verification and Validation

Third Party Inspection

Occupational Health & Safety

Quality Controller 

First Aid 

Fire & Safety

All rights reserved © 2009- 2019 

  • LinkedIn - White Circle
  • Twitter - White Circle
  • Facebook - White Circle
  • Google+ - White Circle
bottom of page